Original USB Type-C charging port for PS5 DualSense controller repairs. Manufacturer-designated V1/N2V3 type. Compare the connector’s metal housing, mounting points, solder contacts, and pin arrangement with the original port before purchasing. Professional microsoldering is required.

PS5 Controller USB-C Charging Port – Original V1/N2V3

Replace a damaged, loose, or non-working USB-C connector on a compatible PS5 DualSense controller with this original manufacturer-supplied replacement port. It is designed for controller repair and refurbishment where the original charging socket has become worn, bent, broken, or detached from the board.

This product is identified by the manufacturer as the V1/N2V3 type. Compatibility must be confirmed by comparing the replacement connector directly with the original USB-C port installed on the controller’s charging board or motherboard.

Suitable for Repairing

• Controller not charging through the USB-C port
• Loose or unstable charging cable connection
• Controller charging only when the cable is held at an angle
• Bent, cracked, or physically damaged USB-C socket
• Broken, burnt, or missing internal connector pins
• USB connection dropping when the cable moves
• Problems with wired controller detection or communication

Please note: these symptoms may also be caused by a faulty USB cable, battery, charging board, motherboard circuit, or another internal component. Replacing the port will only solve the problem when the USB-C connector itself is faulty.

Key Features

• Original manufacturer-supplied USB Type-C port
• Manufacturer designation: V1/N2V3
• Designed for compatible PS5 DualSense controller repairs
• Suitable for charging-port and wired-connection repairs
• Useful for controller repair and refurbishment
• New replacement component
• Professional microsoldering installation required

Product Details

• Product: USB Type-C charging port
• Compatible Device: PS5 DualSense controller
• Manufacturer Designation: V1/N2V3
• Condition: New
• Installation Method: Microsoldering
• Package Quantity: 1 port

Package Includes

• 1 × PS5 DualSense USB-C Charging Port – V1/N2V3

How to Confirm Compatibility

USB-C ports can appear almost identical while using different internal layouts and mounting designs. Before ordering, compare the replacement with the original connector and check:

• Shape of the metal housing
• Position and size of the mounting tabs
• Rear support legs and solder points
• Number and arrangement of the connector pins
• Charging-board or motherboard footprint
• Manufacturer markings where visible

A connector may physically fit the board but still fail to provide the correct charging or USB data connections if its internal pin arrangement is different. Compatibility should therefore not be determined only by the controller’s external appearance.

Installation Information

This connector must be soldered directly to the controller’s internal board. Installation normally requires controller disassembly, removal of the damaged port, cleaning of the solder pads, accurate alignment, and secure microsoldering of the replacement connector.

Professional microsoldering equipment and technical experience are required. Incorrect installation may damage the connector, solder pads, board traces, nearby components, or the controller motherboard.

FAQs

Q: What does V1/N2V3 mean?
A: It is the manufacturer’s designation for this particular USB-C connector type. Use the physical connector design and board footprint to confirm compatibility.

Q: Is this compatible with every PS5 DualSense controller?
A: No. DualSense controllers can use different internal connector designs. Compare the original port carefully before ordering.

Q: Can this repair a controller that does not charge?
A: It may repair the controller when the fault is caused by a damaged USB-C socket. It will not repair faults caused by the battery, cable, charging circuit, or another component.

Q: Can it restore wired USB connection?
A: It may restore wired connectivity when the original USB-C connector is the cause of the problem and the correct compatible port is installed properly.

Q: Is installation plug and play?
A: No. The port requires removal and microsoldering onto the controller’s internal board.

Q: Are installation tools included?
A: No. The package includes one USB-C charging port only.

Important Compatibility Notice

• Compare the replacement with the original connector before ordering.
• Check the metal housing, mounting tabs, solder contacts, and internal pin arrangement.
• Do not determine compatibility only from the controller’s colour or external appearance.
• This listing includes the USB-C charging port only.
• Controller, cable, charging board, soldering tools, and installation materials are not included.
• Professional microsoldering installation is strongly recommended.
• Incorrect installation may permanently damage the controller board.